For Manufacturers of __TARGET_SEGMENT__

Stop quoting configurable products by hand

KonfigX builds web-based configurators that let your customers configure your product themselves, with live engineering checks and production-ready data generated automatically.

Try the live demo Book a call →
konfigx · live configurator
LIVE
W 1240 mm H 920 mm PARAMETRIC · LIVE RECONFIGURING
PARAMETERS
Width1240 mm
Height · max 1500920 mm
Sections3
INSTANT QUOTE
CHF 4,820 VALID
Auto-priced · ready for production
OUTPUT STEP DXF PDF drawing

Every custom quote eats engineering hours

If your product is configurable but quoted manually, every enquiry pulls an engineer away from real work.

Manual quoting today

  • Back-and-forth emails for every variant
  • Engineers redoing the same CAD work
  • Days of delay before the customer gets a price
  • Transcription errors into the ERP

With a KonfigX configurator

  • Customer configures online, sees it in 3D
  • Engineering rules built in: only valid configs
  • Instant price and feasibility, no waiting
  • Clean data straight to production / ERP

From a configurable product to a quote in minutes

Five outcomes that turn manual, repetitive quoting into an automated, engineered pipeline.

W H D W H D PARAMETERS
01 · We map your product

You have a product worth configuring

We capture the parameters, rules and engineering constraints that define your product. If it has variants, dimensions and engineering logic, it can become a configurator.

02 · We build the configurator

Your customers configure it themselves

A web-based configurator with live 3D that updates as they adjust dimensions and options, embedded directly on your site.

1.8 SAFETY FACTOR σ F δ
03 · Engineering rules built in

Every configuration is engineered-correct

Real calculations run in the browser: stress, load and safety checks to the relevant norms. Customers can only configure valid, manufacturable products. Engineering depth, not just a product picker.

CONFIG DXF · BOM ERP / PRODUCTION
04 · You choose how it connects

Output matches your setup, not the other way round

Standalone: DXF, STEP, BOM or PDF quote, no connection needed.

Data sync: nightly export keeps prices and components current.

Full integration: live two-way connection, scoped separately.

DAYS MINUTES
05 · The result

You quote in minutes, not days

Your engineers stop redoing the same quotes. Customers get instant answers. You win more work with less effort.

Typical go-live: 8–12 weeks from first call to production.

Get in touch →

Try a real configurator, right here

konfigx · live configurator
LIVE
Launch configurator

More configurators

All configurators →
Marco Oliveira, founder of KonfigX
Who you're talking to

Marco Oliveira

BSc Maschinenbau & Innovation, Polymechaniker EFZ, with hands-on experience in CNC machining and assembly.

Common questions

How do I know if my product fits a configurator?
Five-second test: does the customer choose dimensions or options, do some combinations become invalid depending on what else is chosen, does someone redo similar CAD or calculations for every enquiry? Three yes answers, it fits.
My product is too complex for a configurator.
Complexity is a reason to configure, not a reason to hold back, and a simple product isn't disqualified either: what matters is how often it gets quoted, not how complicated it is. What actually makes a project hard is never geometric complexity, it's rules that live only in one senior engineer's head and were never written down. That's a discovery problem, not a technical limit, and it's exactly what the feasibility workshop below is for.
What do I need to provide?
Less than you'd think: drawings or CAD of one reference product, the rules and limits that constrain it, your cost and price logic, and roughly three to four working sessions with whoever actually knows the product. That's it, the short list is the point: most of the work is ours, not yours.
What does it cost?
Four things make up the price:
  • Feasibility workshop: half a day, fixed price confirmed upfront, a written scope and effort estimate, credited in full if the project goes ahead.
  • Build: one-off, priced after the workshop based on scope.
  • DynaMaker platform licence: monthly, per application, passed through at cost, we don't mark it up.
  • Operation and maintenance: monthly, covers updates to rules, materials, limits and prices.
ERP integration is scoped and quoted separately, see the next question.
How long does it take to go live?
Most projects go live 8–12 weeks from the first call. Where you land in that range depends on how many variants you have, how well your rules are already documented (a written spec sheet saves weeks over knowledge in someone's head), and whether a system integration is part of phase one or comes later.
How does it connect to our systems?

Three levels, most projects start at the first. Standalone: rules and prices live in the configurator, output as DXF, STEP, a bill of materials or a PDF quote.

Data sync: your system writes a nightly export automatically, no manual step, the configurator always reads current components, prices and lead times from it.

Full integration: a live two-way connection including order creation, scoped as its own project once the configurator is running.

It embeds directly into your existing website in all three cases, exactly like the live demos on this page.

Who operates and maintains it long-term?
The app runs on DynaMaker, an established platform, not on infrastructure of ours. We build it in the KonfigX DynaMaker account and transfer it into your own account once it's ready, you get full access to the code and everything in it, you are not locked to us. DynaMaker also has other partners internationally who can take over an existing application if that's ever needed. Day to day, we handle updates whenever your specs, materials, limits or prices change.

What does manual quoting actually cost you?

A rough estimate, not a promise, adjust the numbers to match your team.

Estimated annual cost of manual quoting
CHF 28'000

At a build starting from CHF 15'000, that's roughly 6 months of manual-quoting cost.

Got a product you quote by hand?

Let's talk about what a configurator could look like for it. No commitment, just a conversation about your process.

Get in touch